|
|
FabriGear 150
|
Resonators: |
2500W or 4000W |
|
Applications: |
Laser cuts and fabricates tube, pipe, and structural shapes in one setup
|
|
Capacities:
|
Up to 6" round or square pipe Up to 26' long is standard (Optional 40')
|
|
Features:
|
Automatically loads, feeds, laser cuts and unloads parts
|
The FABRIGEAR 150 laser cuts small-to-medium size, thin or thick-walled tube and
pipe, whether round, square, rectangular, or triangular. In addition, it can completely process I and H-beams, C-channel, angle iron, and additional user-defined shapes.
6-axis laser cutting means you can cut at any desired angle for weld prep, plus
achieve the highest accuracy for easy fit-up of assemblies - all in a single program
cycle. Moreover, FABRIGEAR'S program-controlled loading, workholding, and unloading
make it a super-efficient fabrication cell requiring a minimum of labor input.
With standard length capacity of 26", FABRIGEAR accommodates standard mill lengths.
And
an extra-long model is available to handle materials
up to 40' in length. Please
refer to FABRIGEAR 300 for larger diameter capacities.
The FG CAM programming software is easy to use with illustrated fill-in-the-blank
screens for quickly generating NC code. It performs dynamic nesting and has over
70 pre-programmed cutting parameters for you to choose from. In addition, fabricators can store their own "best practices" and frequently used setups for even faster
programming.
For a Better Look at FABRIGEAR, click
on any of the videos below:
 |
 |
 |
 |
| See automatic material loading and auto
centering of round pipe, square tube and C
channel. |
See cutting a beveled contour for a pipe
joint, and cutting a 30° bevel on the end of a
square tube. |
See autofeed and 6-axis laser cutting a
contoured hole into the lateral sides of a round
pipe. |
See automatic unloading into the FG sorting
station. |
|
